Bituthene® Liquid Membrane

Two component, elastomeric, liquid applied detailing compound for use with GCP waterproofing membranes

Product Description

Bituthene® Liquid Membrane is a two component, elastomeric, cold applied, trowel grade material designed for a variety of uses with the GCP waterproofing systems. The VOC (Volatile Organic Compound) content is 10 g/L. Architectural and industrial maintenance regulations limit the VOC content in products classified as architectural coatings. Refer to Technical Letters for the most current list of allowable limits.

bituthene liquid membrane application Bituthene® Liquid MembraneUse

Bituthene® Liquid Membrane is ideally suited for the following uses:

  • Fillet material at inside corners
  • Reinforcement material at inside corners
  • Flashing material around drains, protrusions, curbs and parapets
  • Sealing material at terminations
  • Repair material for defects on concrete surfaces
  • Flashing material at corners

The two parts of Bituthene® Liquid Membrane are mixed on site and troweled on to provide a simple and quick waterproofing detailing aid in conjunction with Bituthene®, Preprufe® and Procor® systems.

Product Advantages

  • Liquid applied
  • Waterproof
  • Tough, rubber-like
  • Chemically cured
  • Cold applied
  • System compatible

Surface Preparation

All surfaces must be dry and free from dirt, grease, oil, dust or other contaminants. Bituthene® Liquid Membrane may be applied at temperatures of 25°F (-4°C) or above. Store in a dry place above 40°F.